This is a slave screen of the main Digitizer Control screen.

The currently selected Digitizer (and hence Detector) is shown. This can only be changed from the main Digitizer Control screen. If you do this then return here and Reload the window.

The various settings of the Core Trigger can be adjusted here:-

   Type
   Gain
   Slope
   CFD Delay
   CFD Shift
   Differentiation Constant
   Integration Constant
   
the available settings are shown in the pull-down menus

   Rectify
   Trigger Threshold

these are adjusted by the sliders

   Trigger Enable
   Force Trigger Enable

these are enabled/disabled via the checkboxes


 Each setting is written to the hardware as it is changed.