This is a slave screen of the main Digitizer Control screen.

The currently selected Digitizer (and hence Detector) is shown. This can only be changed from the main Digitizer Control screen. If you do this then return here and Reload the window.

The various settings of the Core Preamp test pulser can be adjusted here:-

   Attenuation
   Frequency
   Mode
   
the available settings are shown in the pull-down menus

   Fine Gain DAC

this is adjusted by the slider

   CFD front panel output
   Enable FPGA pulser
   Enable pulser function

these are enabled/disabled via the checkboxes


 Each setting is written to the hardware as it is changed.