"Module Reset" "Set the Module Reset firmware register"

"Software Reset" "Set the Software Reset firmware register. All data is cleared and all registers are reset to default values"

"Software Clear" "Set the Software Clear firmware register. All data is cleared but the register settings are unchanged"

"Software Trigger" "Set the Software Trigger firmware register"

"Clock Sync" "Forces PLL to re-align all clock outputs with the reference clock"

"Flush event block" "Flushes the current event block for all DPP channels"

"Acquisition Start" "This starts data acquisition within the module: It DOES NOT control data readout"

"Acquisition Halt" "This stops data acquisition within the module: It DOES NOT control data readout"

"Readout Pause"    "Sets a flag so that the data readout software pauses readout"

"Readout Resume"   "Unset the flag so that the data readout software resumes readout"