Front Panel TRG‐OUT (GPO) Enable Mask (0x8110, R/W, C)
This register sets which signal can contribute to generate the signal on the front panel TRG‐OUT LEMO connector (GPO in case of DT and 
NIM boards).
Bit Description
[7:0] Bit n corresponds to the trigger request from channel n (n=0,...,7)
     that partecipates to the TRG-OUT signal.
[9:8] TRG-OUT (GPO) Generation Logic. The enabled trigger requests (bits
     [7:0] or [3:0]) can be combined to generate the TRG-OUT (GPO)
    signal.
   Options are:
  00 = OR;
 01 = AND;
10 = Majority;
11 = Reserved.
[12:10] Majority Level. Sets the majority level for the TRG-OUT (GPO) signal
       generation. Allowed level values are between 0 and 7 for VME boards,
      while between 0 and 3 for DT, NIM and 8-channel VME boards. For a
     level m, the trigger fires when at least m+1 of the trigger requests
    are generated by the enabled couples of channels (bits [7:0] or
   [3:0]) .
[28:13] Reserved.
[29] LVDS Trigger Enable (VME boards only). If the LVDS I/Os are
    programmed as outputs, they can participate in the TRG-OUT (GPO)
   signal generation. They are in logic OR with the other enabled
  signals (bits[31:30] and bits[7:0], or [3:0]).
 Options are:
0 = disabled;
1 = enabled.
[30] External Trigger. When enabled, the external trigger on TRG-IN can
    participate in the TRG-OUT (GPO) signal generation in logic OR with
   the other enabled signals (bit[31] and bits[7:0] or [3:0]).
  Options are:
 0 = disabled;
1 = enabled.
[31] Software Trigger. When enabled, the software trigger can participate
    in the TRG-OUT (GPO) signal generation in logic OR with the other
   enabled signals (bit[30], bits[7:0] or [3:0]).
  Options are:
 0 = disabled;
1 = enabled.