\documentstyle[12pt,a4wide]{report}
\hoffset=-1.25cm
\begin{document}
\begin{center}
{\bf
----------------------------------------------------------------\\}
{\LARGE EUROGAM Project\\}
\vspace{2cm}
{\LARGE Proposal for a stantard H.V.\\controls log book\\}
{\bf
----------------------------------------------------------------\\}
\end{center}
\vspace{4cm}
Edition 1.0\\
November 1990\\


\vspace{7cm}
\noindent Christophe Diarra\\
Marie$-$Madeleine Al\'eonard\\
CENBG, Le haut Vigneau\\
33175 Gradigan Cedex, France\\
\newpage
\begin{center}
\begin{Large}
Proposal for a stantard H.V. controls log book\\
\end{Large}


C. Diarra  M.M. Al\'eonard\\
Edition 1.0\\
November 1990\\
\end{center}
\vspace{1cm}
{\large Object:} make a repertory of the characteritics of high
voltage for each detector $-$ log book to be built progressively from the tests
of the equipement $-$. The results from this log book will be analysed to set
the experiments controls.\\


\noindent {\bf Voltage and current values used for the EUROGAM detectors with
the Lecroy HV 1400 series power supply: set of parameters to be used for
setup and control of experiment\\}
\vspace{1cm}
\begin{center}
RESULTS OF TEST\\
\end{center}
\vspace{1cm}
(a) detector identification from higher level user interface\\


\noindent (b) detector id, example:

\begin{itemize}
\item GUOC17 serial number for Ge\\
\item BGO id and PM id for BGO\\
\end{itemize}

\noindent We need one such sheet for each Ge detector and its BGO shield.\\


\noindent Please give us any comment on further information eventually some\\
feed back on evolution of current versus count rate for BGO and current critical
value for Ge (warming up).\\

\newpage
{\center REFERENCE SHEET = \\}

\begin{center}
\begin{tabular}{||c|c|c|c|c|c|c|c|c||}
\hline
\multicolumn{1}{||c|}{} & & \multicolumn{3}{|c|}{} & \multicolumn{2}{|c|}{}
 & \multicolumn{2}{|c||}{}\\
\multicolumn{1}{||c|}{detector} & detector & \multicolumn{3}{|c|}{voltage
(volts)} & \multicolumn{2}{|c|}{observed output} &
\multicolumn{2}{|c||}{current limit}\\
\multicolumn{1}{||c|}{(a)} & id (b) & \multicolumn{3}{|c|}{} &
\multicolumn{2}{|c|}{current $(\mu A)$} &
\multicolumn{2}{|c||}{}\\
\hline
\multicolumn{1}{||c|}{} & & value \hspace{0.75cm} & accepted & ramp
\hspace{0.5cm} & min \hspace{1cm} & max \hspace{1cm} & DC $(\mu A)$ &
AC $(\mu A)$\\ \multicolumn{1}{||c|}{} & & & fluctuation & value & & & &\\
\hline
\multicolumn{1}{||c|}{} & & & & & & & &\\
GE & & & & &  & & &\\
\multicolumn{1}{||c|}{} & & & & & & & &\\
\hline
\multicolumn{1}{||c|}{} & & & & & & & &\\
BGOa & & & & & & & &\\
\multicolumn{1}{||c|}{} & & & & & & & &\\
\hline
\multicolumn{1}{||c|}{} & & & & & & & &\\
BGOb & & & & & & & &\\
\multicolumn{1}{||c|}{} & & & & & & & &\\
\hline
\multicolumn{1}{||c|}{} & & & & & & & &\\
BGOc & & & & & & & &\\
\multicolumn{1}{||c|}{} & & & & & & & &\\
\hline
\multicolumn{1}{||c|}{} & & & & & & & &\\
BGOd & & & & & & & &\\
\multicolumn{1}{||c|}{} & & & & & & & &\\
\hline
\multicolumn{1}{||c|}{} & & & & & & & &\\
BGOe & & & & & & & &\\
\multicolumn{1}{||c|}{} & & & & & & & &\\
\hline
\multicolumn{1}{||c|}{} & & & & & & & &\\
BGOf & & & & & & & &\\
\multicolumn{1}{||c|}{} & & & & & & & &\\
\hline
\multicolumn{1}{||c|}{} & & & & & & & &\\
BGOg & & & & & & & &\\
\multicolumn{1}{||c|}{} & & & & & & & &\\
\hline
\multicolumn{1}{||c|}{} & & & & & & & &\\
BGOh & & & & & & & &\\
\multicolumn{1}{||c|}{} & & & & & & & &\\
\hline
\multicolumn{1}{||c|}{} & & & & & & & &\\
BGOi & & & & & & & &\\
\multicolumn{1}{||c|}{} & & & & & & & &\\
\hline
\multicolumn{1}{||c|}{} & & & & & & & &\\
BGOj & & & & & & & &\\
\multicolumn{1}{||c|}{} & & & & & & & &\\
\hline
\end{tabular}
\end{center}
\end{document}